Call: 0110243598 Cell: 083 387 6015-073 850 6363  Mon - Fri 7:15 - 16.30


Fire Products

Why You Need a Fire Suppression Systems for Your Office?

An increasing number of office buildings in Johannesburg Gauteng and Nelspruit Mpumalanga are upgrading to clean agent suppression systems to fight fires. Because of the many computers and electronics found in office environments, clean agent suppression is often a superior fire extinguishing option. This way, you don’t have to trade fire damage for water damage.

Fire Suppression System

What Is Clean Agent Fire Suppression?

Clean agents are electrically non-conductive gaseous substances used to extinguish fires. They put out flames by inhibiting the combustion process that requires heat, oxygen, and a fuel source. The systems are fundamentally designed to protect irreplaceable assets and the people around them. A clean agent fire suppression system will take either an inert gas or a chemical that is stored in a container and discharge it, when necessary, to extinguish a fire in its incipient stage. For instance clean agents are most effective when combined with an early fire detection system. This allows the agents to control a fire in its initial stage before it has a chance to spread.

Types of Clean Agent Systems

Bizzy Fire Control installs and services the following clean agent systems in Gauteng and Mpumalanga office buildings:

FM-200: This is one of the most popular clean agents because its non-ozone depleting and safe to use in occupied spaces. While FM-200 does displace the oxygen around a fire, its primary extinguishing capabilities is through heat absorption. FM-200 is effective for fighting Class A, B, and C fires.

CO2: A carbon dioxide system uses a high concentration of CO2 gas to replace the oxygen in a room and smother a growing fire. It’s highly effective, but not appropriate in places where people are present.

INERGEN: This clean agent uses a combination of argon, nitrogen, and carbon dioxide gases to fight fires in an environmentally friendly way. Just like FM-200, it also won’t deplete the ozone or hurt the environment.

3M NOVEC Fire Protection Fluid: The most eco-friendly chemical clean agent available. It extinguishes fires with minimal collateral damage and cleanup, and does so with zero ozone-depleting potential and a global warming potential of just one.

Why Use Clean Agent Suppression Systems in Office Buildings?

Offices that use clean agent suppression enjoy the following advantages:

Fast response time: Clean agents smother fires quickly, often suppressing the flames in 10 seconds or less.

Limited property damage: With no water required and no particle residue left behind, a clean agent suppression system is perfect for protecting your office from fire without risking damage to your equipment.

Less downtime: The time between when a fire ignites and when you can return to business as usual is brief with a clean agent suppression system. Little to no cleanup is required, and your electronics should be unaffected by the clean agents.

Our Clean Agent Suppression System Services

When your fire suppression system requires service, turn to Bizzy Fire Control. We offer the following:

Clean agent suppression system installation: Interested in upgrading to a clean agent system in Johannesburg and Nelspruit office building? We can carefully design and install a solution that will work for you.

Clean agent suppression system maintenance: You can’t ignore your suppression system if you want it to stay up and running. We can perform all the maintenance you need, including inspections and tests required by national and local fire codes.

Clean agent suppression system repair: When something goes wrong with your fire suppression system, you need a reliable company to fix it quickly and efficiently. We offer 24-hour emergency repairs when you need them most.

Clean agent suppression system recharge: If your system discharges in response to a fire, you need to recharge the equipment without delay. Speedy services from Bizzy Fire Control ensure you aren’t left defenseless if another blaze breaks out.

Schedule Office Fire Protection Services in Johannesburg and Nelspruit

If your office needs a new clean agent suppression system installed, or is due for annual maintenance, Bizzy Fire Control is at the ready to assist you. Whatever questions you may have about the operation and maintenance of your clean agent system can be answered by our experienced technicians. It is important to us that you understand how the system works and that you feel protected in the event of a fire.

Contact us now to schedule your office fire protection services in the Johannesburg and Nelspruit Province!


Are you protecting your commercial building from the potential hazards of a fire? There are five common fire safety risks that occur most often in commercial buildings and offices.

Fire Safety in Building


If your fire safety equipment is in disrepair, has not been tested, or has not had routine maintenance performed recently, it can put you and everyone in your office at risk. Your fire safety equipment, including fire alarms, sprinkler systems, fire suppression systems, etc., need to be tested annually to ensure they are fully operational. Additionally, if fire safety equipment is not available, specifically operational fire extinguishers, then you are leaving your building at risk. Having easily accessible fire safety equipment (and instructing your employees on how to use it) is one of the best ways you can help reduce safety risks in your office.


If your fire safety equipment is in disrepair, has not been tested, or has not had routine maintenance performed recently, it can put you and everyone in your office at risk. Your fire safety equipment, including fire alarms, sprinkler systems, fire suppression systems, etc., need to be tested annually to ensure they are fully operational. Additionally, if fire safety equipment is not available, specifically operational fire extinguishers, then you are leaving your building at risk. Having easily accessible fire safety equipment (and instructing your employees on how to use it) is one of the best ways you can help reduce safety risks in your office.


Installing an exceptional fire safety system will do very little if your employees don’t know what to do in the unlikely event of an emergency. Training your employees on how to use fire extinguishers and where to go during an emergency is crucial for complete safety. Additionally, it’s important to train your employees on what to do in the event of an emergency. Having an emergency action plan that details where to do, what to do, and who is in charge in the event of an emergency is vital and can be lifesaving.


Not only does your building need fire safety equipment, it needs to be installed properly and to the exact specifications and requirements of your building (while also meeting all SABS standards and regulations). Your fire protection needs may differ from one area of your building to the next—for instance, if you have a commercial kitchen in a hotel, the fire suppression system used in the kitchen would be different from the fire suppression system used in the guest rooms. Bizzy Fire Control can explain all of the differences between various types of fire protection equipment and systems and help you make an educated decision.


There are many ways that people in your office will put themselves at risk, including misusing extension cords, using damaged power cords, and misusing space heaters. All of this equipment needs to be carefully monitored and used correctly to prevent the threat of fire and damage to personnel and the building.

Extension cords need to be properly approved by a certifying laboratory and only used to connect one device at a time. Power cords should be checked periodically for any damage or ungrounded cords. Personal space heaters must be plugged directly into an outlet and cannot be plugged into an extension cord or power strip.


Your fire sprinklers are an integral part of your fire safety equipment, but if tall equipment is blocking the sprinkler head directly or objects are obstructing the spray of the sprinkler, you could be putting your office at risk. Nothing should ever be placed within 18 inches of your fire sprinkler. If you are unsure whether or not you are using your fire safety equipment in the safest manner possible, it’s important to talk to a fire protection company like Bizzy Fire Control to learn more about proper office fire safety.

What Can You Do to Help Prevent Office Fires?

How can you prevent these potential fire safety risks from posing a threat in your office? You need to have a fire protection company come to your building and assess your current fire safety equipment and educate you and your employees about the best fire safety practices and what upgrades or repairs need to be made to any existing equipment—and if any additional equipment is required. For more Contact us today

When to inspect fire hydrant?

SABS standards require that all public fire hydrants be inspected on an annual basis. Fire hydrants can be affected by a number of outside factors, including regular wear-and-tear, accidental damage, vandalism, or mechanical function. If your Johannesburg or Nelspruit building’s fire hydrant needs inspection, call Bizzy Fire Control today. Our SAQCC certified and trained technicians can ensure that your fire hydrant stays up to standard and will be able to protect you and your business in the event of a fire.

Fire Hydrant

Fire Hydrant Inspection Process

At Bizzy Fire Control, our fire hydrant inspection process is designed to ensure that your building’s fire hydrant meets all proper standards. There are three main steps in our process:

We start by opening your fire hydrant fully and letting it flow for at least a full minute. This clears all foreign material out of the fire hydrant and lets it run as smoothly as possible.

After stopping the flow we observe the fire hydrant and make sure it drains properly.

In conclusion, we lubricate all fire hydrant stems, threads, and caps to make sure they are in proper operating condition and will be easily accessible to the fire department.

Is your Johannesburg or Nelspruit building’s fire hydrant ready for inspection? Call Bizzy Fire Control today to make sure your hydrant is up to standard and able to protect you in the event of a fire.

Why Fire Hydrant Inspections?

The purpose of a fire hydrant is to provide firefighters with a reliable source of water to tap into should a blaze break out in your building. For instance this makes fire hydrants a vital part of the community’s fire protection system, yet it’s easy to overlook the importance of maintaining and repairing these fixtures. Here are the top reasons to make this an annual priority for your business:

Verify safe operation: Common safety issues with fire hydrants include water leaks, missing parts, rusted bolts, broken couplings, loose nozzles, and other parts in need of repair or replacement. An inspection addresses these safety issues to ensure proper operation if it ever becomes necessary to tap into the hydrant for firefighting purposes.

Ensure reliable performance: A flow test during a fire hydrant inspection determines if any issues exist that could interfere with the fixture’s ability to help fight a fire. Such issues might include seized operating nuts or caps, low flow caused by partially closed valves, and poorly lubricated parts. Even the fire hydrant’s location is an important consideration in terms of accessibility when firefighters arrive at the scene.

Check the water flow: A flow test ensures adequate water pressure in all areas of the system. Places with significantly lower flow could have partially closed valves, a problem that can only be identified during a fire hydrant inspection.

Remove sediment from the system: Dirt, rust, and other debris in your fire hydrant lines could affect performance. A system flush during a fire hydrant inspection clears this sediment from the system.

Avoid liability issues: If your building succumbs to a fire and you haven’t kept up with annual fire hydrant inspections, you could be in for a nasty surprise when the neglected fire hydrant fails to serve its purpose. This could leave you liable for the damages to your building since your insurance company can cite neglect as a reason to deny coverage. Of course, the damage is also likely to be higher if firefighters can’t tap into the hydrant to help extinguish the fire, resulting in an expensive twofold setback for your business.

Why Choose Bizzy Fire Control?

Bizzy Fire Control has over 10 years of experience providing complete fire protection services for businesses, organizations, government buildings, and restaurants in Gauteng, Mpumalanga and the rest of South Africa. Our number one focus is your safety—we want to make sure your employees, property, and valuables are safe from the dangers of potential fires.

The best thing about partnering with Bizzy Fire Control is that we are your single source solution for all fire protection services. Our experienced fire safety professionals specialize in all aspects of fire protection, including:

Commercial kitchen fire suppression

Fire sprinkler systems

Fire alarm systems

Fire suppression systems

Fire extinguishers

Contact us online or by phone at 011 024 3598 or 013 752 2199 to schedule your fire hydrant inspection.

We provide fire protection services in:

Gauteng: Johannesburg, Sandton, Pretoria, Boksburg, Benoni, Kempton Park, Germiston, Edenvale, BedfordView, Alberton, Krugersdorp, Randburg, Rosebank, Greenside, Northcliff, Cresta, Parktown, Hyde Park, Midrand, Dainfern, Fourways, Honeydew, Cunturion, Sunnyside, Midstream, Faerie Glen, Menlo Park, Garsfontein, Doornpoort, Montana Park, Waverley, Rietfontein,

Mpumalanga: Nelspruit, Secunda, Witbank, Ermelo, Middelburg, Piet Retief, Standerton, Lydenburg,Delmas, Barberton

What is the best fire protection system for my business?

Fire protection is never one-size-fits-all; different environments demand different kinds of fire protection systems. It is vital to know what kinds of hazards your business presents so that you can outfit your building with the best equipment for your needs.

In order to ensure a safe working environment, you must protect your building, assets, and people with a solid fire protection plan. 

The most common equipment for fire protection in a business environment is:

At Bizzy Fire Control, we can install inspect, maintain, repair, and replace your business’s fire protection equipment as needed. We’re happy to be your full-service fire protection company in Johannesburg, Gauteng and Nelspruit, Mpumalanga so you can get everything you need in one place.

We’re happy to be your full-service fire protection company in Johannesburg, Gauteng and Nelspruit, Mpumalanga.

Fire Protection for Businesses

No matter what your business type, we have the experience to outfit your business with the fire protection equipment it needs. We are dedicated to fire prevention in all contexts and will be sure to train you on all of your fire protection systems so that you are well-prepared in the event of an emergency.

Protecting your business against fire is one of the most important things you can do for your financial safety and the safety of your employees. Not only fire dangerous, but they can cause severe damage which can lead to downtime and costly repairs. The best way to protect your business from fire, reduce potential damage to the building and its contents, and keep occupants safe, is by investing in a fire protection system. Fire protection systems include fire suppression, sprinklers, smoke detectors, and other fire protection equipment that works in tandem to protect against fire.

It is best to work with a fire protection company that understands the needs of your property and provides a variety of integrated protection systems. Bizzy Fire Control provides a full range of fire protection services, from system design to installation, maintenance, inspection, and repair.

Types of Fire Protection Systems?

Fire protection systems are considered either active or passive. Bizzy Fire Control has expertise in the design, installation, inspection, and repair of three main types of active fire protection systems: fire detection systems, fire suppression systems, and fire sprinkler systems.

Passive fire protection is often forgotten but equally as important and must be combined with active fire protection systems for full fire protection. Passive fire protection systems are those systems put in place within the structure of the building and require no human interaction to do what they were intended to do.

Emergency lighting and exit signs are also considered examples of passive fire protection. Bizzy Fire Control can provide both active and passive fire protection services like design and installation of fire protection systems.

Bizzy Fire Control protects all facilities and properties business, government, and industrial with a full range of fire protection services and life safety solutions. We will work with you to ensure your project is completed – on time and on budget.

What Are The Fire Protection Services And Maintenance Requirements?

The fire protection services and maintenance required for a particular fire protection system relies on SAQCC and ASIB regulations.

Parts of your fire protection systems may need to be inspected or tested at regular intervals.

You may need to be trained on how to use specific fire protection equipment. That’s why it is best to work with a fire protection company that provides a full spectrum of fire protection services.

Not only will Bizzy Fire Control help design and install active and passive fire protection systems, but we will also provide guidance on proper maintenance, schedule inspections or testing, and stand by for emergency repairs.

Contact Bizzy Fire Control today to get a quote for fire protection services or ask about the right fire protection system for your business today.

Website Design by: Bizzy Fire Control Call Now